Toshiba Electric Heater E STUDIO1355 User Manual

Copier Bulletin: TSB-1078  
Date:  
Page:  
4/8/2011  
1 of 3  
Models: e-STUDIO1355 Series  
Subject: Service Manual Correction Tray Heaters  
Overview  
Corrections are needed to the “Connecting the Tray Heaters” section of the e-STUDIO1355  
Series Service Manual.  
Detail  
Please download the corrected manual or store the following corrections with your service  
manual. The corrected manual is version 00a or later, posted on 3/25/2011. (Corrections are in  
red)  
Location of the Incorrect Description  
Installation > Main Machine > Installation > Connecting the Tray Heaters of the Main Machine  
(pages 54 ~ 56 in the e-STUDIO1355 Series Service Manual v00)  
Corrected Text  
Connecting the Tray Heaters of the Main Machine  
The machine comes from the factory without the tray heaters already installed but  
disconnected. Tray heater installation is optional. The heaters should be connected if the  
location has high humidity.  
Consult with the customer before connecting the tray heaters.  
Doing this procedure connects the following anti-condensation heaters inside the main machine  
at the following locations:  
One unit below the transfer unit (if installed)  
Two units in the paper tray unit (if installed)  
One unit in the scanner unit (if installed)  
One unit in the LCIT (if installed)  
Copyright-2009 Toshiba America Business Solutions, Inc. (TABS). This publication contains proprietary and confidential  
information retained for reference purpose by authorized TABS dealers. Unauthorized use of this information is prohibited.  
TABS makes no express or implied warranty, including implied warranties of merchantability for a particular purpose, with regard  
to this technical publication and disclaims any claim arising by reason of the possession or use thereof.  
 
1. Remove the small connector [A] from the relay connector and then connect it to connector  
CN606.  
2. Clamp the relay connector [B] to the bracket of the AC drive board.  
3. Connect the large connector [C] to connector CN602 as described in the previous  
procedure.  
 

Tektronix Network Router HFS 9000 User Manual
Toshiba All in One Printer e STUDIO 55 User Manual
Toshiba Copier MD 0101 User Manual
Triax TV Receiver C HD415 CX User Manual
Tripp Lite TV Cables N820 01M User Manual
Tyco Electronics Car Video System 1525l User Manual
Univex Lawn Mower 405012X108 User Manual
Univex Stereo Amplifier AM 77 User Manual
ViewSonic Computer Monitor VA702 User Manual
VTech Telephone mi6866 User Manual